|
Wavelength
|
355 - 1150 nm
|
|
Other available models
|
|
| WinCamD-UCD12-S1 |
355 - 1150 nm |
| WinCamD-UCD12-S2 |
355 - 1150 nm |
| WinCamD-UCD12-1310 |
355 - 1350 nm
Residual silicon response
1290 nm long-pass filter and light guard tube included |
| WinCamD-UCD12-NIR |
1480 - 1605 nm
NIR to Visible conversion phosphor (Erbium response), 40 µm FWHM Point Spread Function |
| WinCamD-UCD12-UV |
190 - 1150 nm
UV converters with wavelength options down to X-ray
UV resolution to 1µm |
| Accessory: Cam-IR Adapter |
1480 - 1605 nm IR Phosphor
10% non-uniformity
180 μm FWHM Point Spread Function |
| Accessory: UV Converter |
190 - 355+ nm |
|
Pixel Count, H x V
|
1.4 Mpixel, 1360 x 1024
|
|
Image Area
|
6.3 x 4.8 mm
|
|
Pixel Dimension
|
4.65 x 4.65 μm
|
|
Min. Beam (10 pixels)
|
~47 μm
|
|
Shutter Type
|
Synchronous
|
|
Max. Full Frame Rate
|
~10 Hz
|
|
Max. ‘Every Pulse’ PRR
|
~10 Hz
|
|
Single Pulse Capture PRR
|
~20 kHz
|
|
Signal to RMS Noise
|
1,000:1
|
|
(Opt./Elec.* dB)
|
(30/60* dB)
|
|
Dynamic Range
|
43 dB
|
|
Electronic Shutter + ND + SNR
|
113** dB (2.1011:1)
|
|
ADC
|
14-bit (16,384 levels)
|
|
Measurable Sources
|
CW beams.
Pulsed sources. Isolated pulse 1 to 20 kHz, single pulse isolation
Software configurable Auto-trigger, Synchronous & Variable Delay
|
|
Measured Beam Powers
|
See the Saturation Power Graph, page 5 of the datasheet
|
|
Electronic Dynamic Range
|
|
|
CW
|
44 dB (25,000:1) electronic shutter
|
|
Pulsed
|
7 dB (5:1) WinCamD gain control
|
|
Manual Beam Attenuation
|
Provided ND 4.0 (10,000:1) C-mount Neutral Density filters.
|
|
Accessories
|
ND 0.5, 1, 2, 3, 4 & 5 Screw stackable C-mount filters available.
EAM-2 4-wheel stepped variable attenuator, 0 to 90 dB
CUB and CUB-UV ~5 %, 90o deviation wedge beam samplers
Holographic Beam Samplers 1% & 0.05% (Gentec-EO)
HPDA High Power Dielectric Attenuators (CVIMG Laser)
|
|
Displayed Profiles
|
Line, 2D & 3D plots. Normalized or un-normalized.
Linear or Logarithmic, Zoom x10
2D, 3D in 10, 32 or max. colors or grayscale.
Contoured display at 10 and 32 colors.
|
|
Measured & Displayed Profile Parameters
|
Raw and smoothed profiles
[Triangular running average filter up to 10% FWHM]
|
|
Beam Diameter
|
Diameter at two user set Clip levels
Gaussian & ISO 11146 Second Moment beam diameters
Equivalent diameter above a user defined Clip level
Equivalent Slit and Knife Edge diameters
|
|
Beam Fits
|
Gaussian & Top Hat profile fit & % fit
Equivalent Slit profile
|
|
Beam Ellipticity
|
Major, Minor & Mean diameters. Auto-orientation of axes.
|
|
Centroid Position
|
Relative and absolute
Intensity Weighted Centroid and Geometric Center
Beam Wander Display and Statistics
|
|
Measurement Accuracy
(not limited to pixel size)
|
0.1 µm processing resolution for interpolated diameters. Absolute accuracy is beam profile dependent – ~1 µm accuracy is frequently achievable. Centroid accuracy is also beam dependent. It can be as good as ±1 µm since it is arithmetically determined from all pixels above the centroid clip level.
|
|
Processing Options
|
Image & profile Averaging, 1, 5, 10, 20, Continuous.
Background Capture and Subtraction.
User set rectangular Capture Block for capture
User set or Auto ellipse Inclusion region with beam tracking for processing
*.ojf files save all WinCamD custom settings for particular test configurations
|
|
Update Rates
|
~5 Hz maximum for full frame, full screen. Higher for small Capture Blocks
|
|
Pass/Fail display
|
On-screen selectable Pass/Fail colors. Ideal for QA & Production.
|
|
Log data and statistics
|
Min., Max., Mean, Standard Deviation, to 4096 samples
|
|
Relative Power Measurement
|
Rolling histogram based on user’s initial input. Units of mW, μJ, dBm, % or user choice (relative to a reference measurement input)
|
|
Fluence
|
Fluence, within user defined area
|
|
Certification
|
RoHS, WEEE, CE
|
|
Multiple Cameras
|
1 to 8 cameras. Serial capture or parallel triggered capture.
|
|
Head Dimensions, Width x Height x Depth
|
115 x 61 x 23/29 mm (2.65 x 2.4 x 0.9/1.13“) without/with 5.0 mm high ND filter holder with ND4 filter.
|
|
Optical depth from housing/filter to sensor (no window) ±0.2 mm
|
8.6/13.1 mm (verify before purchasing)
|
|
Mounting
|
¼”-20 holes aligned with sensor center. 4-40 holes on camera rear.
|
|
Weight, Camera Head
|
155 g (5.5 oz)
|
|
Minimum PC Requirements
|
1 GHz Processor running Windows 7/Vista/XP (32/64 bit); 2 GB RAM; 1024 x 768 display; USB 2.0/3.0 hi-power (500 mA) port
|
