Revision & Date
Most recent at top
|
Issues
Addressed |
30 May '06
iDataRay.exe
Version 6.00P18
|
Applies to:
New features:
Enhancements:
Fixes:
|
WinCamD Classic and -UCM Series
Faster capture rate on all cameras.
Additional protection against MFC errrors added in a number of areas.
WinCamD-UHS triggering now functioning.
Default trigger high Input Response Limit now sets to 100 %.
Save now saves to the last used Directory.
|
23 Mar '06
iDataRay.exe
Version 6.00P1
|
Applies to:
New features:
Enhancements:
Fixes:
|
BeamMap Series, WinCamD Classic and -UCM Series
WinCamD-Uxx Series: Adds WinCamD-UHR and -UHS .
Protection against crashes added in a number of areas. In particular fixes a crash problem associated with multiple restarts of Averaging.
|
14 Oct '05
iDataRay.exe
Version 6.00M
|
Applies to:
New features:
Enhancements:
Fixes:
|
BeamMap Series, WinCamD Classic and -UCM Series
WinCamD Series: Centroid readout now reflects toolbar choice of Xc, Xp, Xg or Xu.
Click and Drag distance measurement added to 2D image in Xu mode.
Pixel intensity of pixel under crosshair added.
Zoomed profile pan now possible using center button on mouse.
Image buffer size increased to 64 images.
Buffer replay movie button added
WinCamD-UCM Series: Offset Calibration Procedure added. See Application Note.
PLS correction added for short exposures: See Application Note.
BeamMap Series: Centroid and Ellipticity confusion between planes
|
30 April '05
iDataRay.exe
Version 6.00H3
|
Applies to:
New features:
Enhancements:
Fixes:
|
BeamMap Series
Adds Version 7 Gain mode for latest head cards.
|
25 April '05
iDataRay.exe
Version 6.00H
|
Applies to:
New features:
Enhancements:
Fixes:
|
All, BeamMap Series, BeamScope-P7, WinCamD Classic & -UCM
Covers WinCamD-UCM. (Also covered by Versions 6.00 through 6.00G12, not listed here).
BeamScope-P7: Find/Search now updates in real-time. M2D sequence improved.
All: Faster operation and no 'blinking' buttons.
BeamScope-P7: Centroid now correct (In error after a recent rev.)
|
24 Oct '04
iDataRay.exe
Version 5.00S8
|
Applies to:
New features:
Enhancements:
Fixes:
|
All, BeamScope-P7
BeamScope-P7: Max probe movement is now 34 mm.
All: Divergence function works with in 4 sigma beam diameter.
Save as text function now works every time.
BeamScope-P7: Save current data now always saves the last data displayed.
Auto update 2D on is now off when uunchecked.
With a single vertical slit, the Xc value is now correct.
|
14 Oct '04
iDataRay.exe
Version 5.00S7
|
Applies to:
New features:
Enhancements:
Fixes:
|
All, WinCamD
All: Clear function in Print with Notes now functioning again.
WinCamD: Corrects bug in Yc, Yg and Yp. Now gives a constant values Xc, Yc values for any Capture Block size or position. 0, 0 is the center of the chip. Note that this constancy does not apply to Yu, the user-placed crosshair, which is always related to the origin of the actual capture block, not the chip origin.
|
15 Sept '04
Beamscope-P7 PCI Firmware
Version 4 |
Revisions apply to:
New features:
Enhancements:
Fixes:
|
BeamScope-P7
Adjusts clock phase to fix a timing error seen on some PCI cards
that prevent normal operation. |
15 Sept '04
iDataRay.exe
Version 5.00S3
|
Applies to:
New features:
Enhancements:
Fixes:
|
WinCamD
WinCamD: Adds Movie camera tool button to replay the images in the image buffer of a saved multi-image file. Interval is 0.0 (PC speed limited) to 100 sec.
|
16 Aug '04
iDataRay.exe
Version 5.00S2
|
Applies to:
New features:
Enhancements:
Fixes:
|
Beamscope-P7
BeamScope-P7: Adds Force fixed span width and Force fixed span center to the right-click menu in the profiles area.
BeamScope-P7: Reinstates logging.
|
16 Aug '04
iDataRay.exe
Version 5.00S1
|
Applies to:
New features:
Enhancements:
Fixes:
|
Beamscope-P7; All WinCamD Series
BeamScope-P7: Changes default centroid display area to 4 mm diameter.
WinCamD: Adds ROI (Region of Interest) setting and readout to the software interface.
|
31 July '04
iDataRay.exe
Version 5.00R11,12
|
Applies to:
New features:
Enhancements:
Fixes:
|
All BeamMap Series
3XY100: Use of wide slits for knife edge mode in the M2 calculation and display.
|
13 June '04
iDataRay.exe
Version 5.00R8
|
Applies to:
New features:
Enhancements:
Fixes:
|
All BeamMap Series
Linearity: Upgraded centroid position compensation algorithm increases radius of 'Sweet Spot' area for in-spec diameter measurement.
|
27 May '04
iDataRay.exe
Version 5.00R4
|
Applies to:
New features:
Enhancements:
Fixes:
|
All
Print now sets a larger font for the 2W and fit results.
All: Corrects a Top-Hat fit code error that resulted a Fit % that was too low.
|
25 May '04
iDataRay.exe
Version 5.00R3
|
Applies to:
New features:
Enhancements:
Fixes:
|
BeamScope-P7
BeamScope-P7: Corrects no data saved when data is saved before the 26 sample buffer has been filled.
Corrects MFC error when Save as text was selected.
Corrects scanning on a very few heads set for large travel range >32.5 mm.
|
10 May '04
iDataRay.exe
Version 5.00R1
|
Applies to:
New features:
Enhancements:
Fixes:
|
WinCamD
WinCamD: Restores CCD Gain control lost at previous rev.
Adds back in the DataRay.vi file for LabView users.
|
23 April '04
iDataRay.exe
Version 5.00R
|
Applies to:
New features:
Enhancements:
Fixes:
|
All, BeamScope-P7, WinCamD
All: New compact install program for both the full software and for software updates.
iDataRayUpdate.exe is a self-installing program. Just click on the link and select Open.
WinCamD: The Exposure is now Settable in External trigger mode. (Auto-exposure is automatically turned off.)
BeamScope-P7: Sets 'Motor off' as the default whenever the software is off. This prevents 'hot to the touch' heads.
WinCamD: 2D screen updating on saved image sequences. (Was only updating every second image).
WinCamD: i and o once more zooms the profile area.
|
|
5 April '04
iDataRayOcx.exe
Version 5.00Q10
|
Revisions apply to:
New features:
Enhancements:
Fixes:
|
BeamScope-P7
BeamScope-P7: Completes Export Profile data to Excel and Save Profile data as text corrections on u-profile values and step sizes for single vertical slit operation.
|
|
17 Mar '04
iDataRayOcx.exe
Version 5.00Q7
|
Revisions apply to:
New features:
Enhancements:
Fixes:
|
BeamScope-P7; WinCamD series
WinCamD series: Added WinCamD: DualCamD option in Device pull-down menu. Applies to beam divergence measurement using two cameras separated by a diatance in z. See datasheet at website.
BeamScope-P7: Corrects v-profile values and step size errors in Export Profile data to Excel and Save Profile data as text.
|
|
9 Mar '04
iDataRayOcx.exe
Version 5.00Q4
|
Revisions apply to:
New features:
Enhancements:
Fixes:
|
All; BeamMap series; WinCamD series
WinCamD series: PMF factor for Y slaved to that for X.
All:Logging function operation now simpler to use.
Added Auto Zoom option to 2D display.
BeamMap series:KE mode scaling now always set for best sampling.
WinCamD series: Compensation file layout changed in Setup screen. Default limits now wider.
Fluence: Average and peak ratio now correct. Cut-off clip level for Average Fluence is now 1.45%.
Pulsed lasers:
Auto-trigger Exposure settable option now automatically disables Auto-exposure.
Redundant frequency set options removed.
BeamMap series: Divergence plot errors in the positions of measured diameter points.
KE mode 2D screen now shows actual beam, rather than beam integral.
WinCamD series: Stops 16X zoom dropout when clicking & dragging a dimension on the plot.
Compensation file option reinstated.
|
|
27 Feb '04
iDataRayOcx.exe
Version 5.00Q2
|
Revisions apply to:
New features:
Enhancements:
Fixes:
|
All; WinCamD series. For descriptions, download Beam Fit Algorithms Application Note.
WinCamD: Adds Effective diameter, with Clip level set in the Setup pull-down menu.
Adds Non-uniformity based on the beam above the Clip A level.
All: Adds real time data logging to a RTDATA.txt file that can be read by other software.
|
|
13 Feb '04
iDataRayOcx.exe
Version 5.00Q |
Revisions apply to:
New features:
Enhancements:
Fixes:
|
All; WinCamD series
All: Adds Show Clip Intercepts as vertical tick marks option on the profiles.
WinCamD: Graphics bug on a few PCs that led to image breakup, particularly on pulsed lasers.
|
|
13 Feb '04
WinCamD camera Firmware
Version 6 |
Revisions apply to:
New features:
Enhancements:
Fixes:
|
WinCamD series
WinCamD series: Reduces camera noise background ('wood-grain' noise structure seen particularly at warm-up, first few minutes).
|
|
2 Feb '04
iDataRayOcx.exe
Version 5.00P1 |
Revisions apply to:
New features:
Enhancements:
Fixes:
|
WinCamD series, BeamMap series
WinCamD: Graphics bug on some slow, low memory, Windows '98 machines that prevented view of image sequence and button captions.
BeamMap: Graphics bug on some machines when the M^2 screen is open and G and S are pressed several times.
|
|
21 Jan '04
iDataRayOcx.exe
Version 5.00N11 |
Revisions apply to:
New features:
Enhancements:
Fixes:
|
WinCamD series
Release of Std. Deviation, Coefficient and Roughness fits and calculations on profiles.
|
|
20 Jan '04
iDataRayOcx.exe
Version 5.00N10 |
Revisions apply to:
New features:
Enhancements:
Fixes:
|
BeamMap series
Freeze and MFC error seen on some PC's when using Go/Stop and the M-squared window. (Error introduced at rev. 5.00K6 but only recently highlighted.) |
|
13 Jan '04
iDataRayOcx.exe
Version 5.00N6
(Replaces defective 5.00N3 & N5 files posted 6 Jan & 9 Jan) |
Revisions apply to:
New features:
Enhancements:
Fixes:
|
BeamScope P7-2D, WinCamD
BeamScope-P7 2D : Adds WinCamD button to BeamScope-P7 and Return button to WinCamD to simplify switching between the software elements.
Adds automatic standby mode to reduce head heating when not in use.
Adds use of + & - buttons to shift stage left-right. Hold down to move continuously.
ESCape button gets you out of any 2D mode so you can start again.
Repeat Last Scan rescans the previous scan area.
You may change scan resolution then use this button.
BeamScope-P7 2D : More robust Find, Setup Scan, Find Center, diagnostics and messaging.
WinCamD :
Reestablishes live updating on Xp and Xu centroids.
Corrects File save/recall glitches in versions
5.00N1 and up.
|
13 Dec '03
iDataRayOcx.exe
Version 5.00N1
|
Revisions apply to: |
BeamMap series & Beam'R |
New features: |
BeamMap-C & ColliMate: Adds an Xc@ button for setting the default choice of centroid plane for u and v profile displays. |
Enhancements: |
|
Fixes: |
All: Prevents occasional beam profiling 'glitching' that could affect the averaging display. |
|
10 Dec '03
iDataRayOcx.exe
Version 5.00M7
|
Revisions apply to: |
All, BeamScope-P7, WinCamD |
New features: |
WinCamD: Adds a Method: Enable Use Effective Slits for WinCamd interfacing |
Enhancements: |
All: Adds ability to correct for an optical magnification into the instrument. BeamMap series: Sets default centroid reading for u and v display to plane 4, immediately before detector.
BeamScope-P7: Improved search routine for small beams. |
Fixes: |
All: Save box no longer reappears (recent bug)
All: Save as text no longer hangs.
WinCamD: Corrects a recently introduced click and drag Included Power bug.
WinCamD: Corrects (x 180/pi) error that was giving stupid Divergence in mrad values. (Recent bug) |
|
6
Nov '03
iDataRayOcx.exe
Version 5.00M3
|
Revisions
apply to:
New features:
Enhancements:
Fixes:
|
WinCamD
WinCamD:
Adds back the Fluence dialog as a Thermometer icon on the Tool bar.
|
|
|
Revisions
apply to:
New features:
Enhancements:
Fixes: |
All,
WinCamD, BeamScope-P7
All:
Adds Auto rotate to the 3D image
WinCamD:
Adds Don't show Crosshairs and Show Image Information
BeamScope-P7: In the Setup screen,
Maximum span now actually reads in mm. Used to say mm but read microns. |
26
Sept '03
iDataRayOcx.exe
Version 5.00L4
|
Revisions
apply to: BeamScope-P7, BeamMap,
BeamMap-C, ColliMate, Beam'R
New features:
Enhancements:
Fixes: BeamScope vertical operation,
e.g. on 2D stage. Improved position-referencing fixes droop seen on
a few units.
BeamMap,
BeamMap-C, ColliMate, Beam'R: fixes a freeze problem when the input
signal drops suddenly. |
9
Sept '03
iDataRayOcx.exe
Version 5.00L2
|
Revisions
apply to: BeamScope-P7
New features:
Enhancements:
Fixes: Implements the 5.00K9 fixes for
Version 1 of the BeamScope-P7 firmware, without requiring a firmware
upgrade.
Fixes a scan speed issue under single slit operation on beam diameters <<1 mm. |
5
Sept '03
iDataRayOcx.exe
Version 5.00K9
|
Revisions
apply to: BeamScope-P7
New features:
Enhancements: 2D scanning improved
to allow wider valid scan limits.
Fixes: Crashes when screen changed during
live operation. |
8
Aug '03
iDataRayOcx.exe
Version 5.00K6
|
Revisions
apply to: BeamMap, BeamMap-C, ColliMate, Beam'R
New features:
Enhancements:
Fixes: Refind when button is pressed. |
30
July '03
iDataRayOcx.exe
Version 5.00K5
|
Revisions
apply to: WinCamD
New features:
Enhancements:
Fixes: Bug that prevented the opening
of WinCamD files from some earlier versions. |
23
July '03
iDataRayOcx.exe
Version 5.00K2
|
Revisions
apply to: BeamMap/Beam'R
New features:
Enhancements:
Fixes: Bug that allowed nominal Gain
excursions to go beyond actual Gain limits. |
21
July '03
iDataRayOcx.exe
Version 5.00K
|
Revisions
apply to: WinCamD
New features:
Enhancements: Beam Wander now
allows setting of update rate and number of points.
Fixes: Corrects bug causing incorrect
display of 2W_Major and 2W_Minor.
Beam Wander no longer restarts once 8192 samples reached. |
23
June '03
iDataRayOcx.exe
Version 5.00J4
|
Applies
to: BeamScope-P7
New features:
Enhancements:
Fixes: Corrects multiple M^2 window
problems in the M^2 measurement part of the software. Now preserves
default head type settings. |
12
June '03
iDataRayOcx.exe
Version 5.00J2
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements:
Fixes: Corrects an 'oops' in Ver 5.00H8
which caused beam diameters to appear as 0 in the release version. |
6
June '03
iDataRayOcx.exe
Version 5.00H8
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Speeds
up camera switching and improves VB interface.
Fixes: Filter function for low filter
values for medium and small Capture Blocks.
Capture Block position slide function in WinCamD Setup screen. (Mainly
used as an internal diagnostic). |
5
June '03
iDataRayOcx.exe
Version 5.00H7
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Speeds
up camera switching and improves VB interface.
Fixes: |
29
May '03
iDataRayOcx.exe
Version 5.00H4
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements:
Fixes: Corrects a no head found problem
onsometimes seen on BeamScope-P7. |
29
May '03
iDataRayOcx.exe
Version 5.00H4
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Improved
pulsed laser capture.
Fixes: Corrects file extension of *.bmp
saved screen images. |
27
May '03
iDataRay.exe, DRexe.zip
Version 3.06R
|
Applies
to: BeamMap, ColliMate
New
features: None
Enhancements: Improved diameter acccuracy by compensation
of residual motor speed non-uniformity.
Fixes: |
16
May '03
iDataRayOcx.exe
Version 5.00G12
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adds
VB interfaced set and read exposure time and import Effective slit profile.
Fixes: |
14
May '03
iDataRayOcx.exe
Version 5.00G9
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements:
Fixes: Corrects VB interfaced centroid
calc for high centroid clip levels and high filtering levels. |
7
May '03
iDataRayOcx.exe
Version 5.00G8
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adds
property 'eTrapOn' to switch on or off the rap detection in the OCX.
Fixes: Corrects camera selection offset
for Effective slit centroids for VB interfacing. Sets center of EQ profile
as zero, instead of LH edge. |
29
Apr. '03
iDataRayOcx.exe
Version 5.00G7
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adds
repeat data and repeat camera traps for VB interfacing.
Fixes: |
24
Apr. '03
iDataRayOcx.exe
Version 5.00G1
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adds
to WinCamD the ability to software interface to the Equivalent Slit
profiles and the Linear profile filter features.
Fixes: |
21
Apr. '03
iDataRayOcx.exe
Version 5.00G
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adds
to WinCamD the ability to software interface to the Gamma, crosshair
orientation & frozen centroid Trap features.
Fixes: |
16
Apr. '03
iDataRayOcx.exe
Version 5.00F3
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements:
Fixes: Diameter readout issue related
to LabView interfacing. |
13
Apr. '03
iDataRayOcx.exe
Version 5.00F2
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements:
Fixes: Beam'R step size calibration
on some heads, which had diameter readings lower than actual. |
6
Apr. '03
iDataRayOcx.exe
Version 5.00F1
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Camera
to camera switching improvements for multicamera applications..
Fixes: |
2
Apr. '03
iDataRayOcx.exe
Version 5.00E11
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Camera
to camera switching delay set to 30 ms. for multicamera applications..
Fixes: |
1
Apr. '03
iDataRayOcx.exe
Version 5.00E10
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Improved
2D pseudo-reconstruction scaling.
Improved 2D Scan features.
Fixes: |
21
Mar. '03
iDataRayOcx.exe
Version 5.00E7
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Equal
u & v scale on scanned regions if diameter ratio is <4:1.
Fixes: P7 Scan head stays out for
Aim and Slits positions.
4 sigma clip level indicator now automatically sets to 13.5%. |
20
Mar. '03
iDataRayOcx.exe
Version 5.00E6
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: BeamScope-P7
enhancements phase 2, including 2D stage initial release.
Fixes: 2D screen occasional mis-scaling.
Centroid offset on display on WinCamD. |
13
Mar. '03
iDataRayOcx.exe
Version 5.00E2
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: BeamScope-P7
enhancements phase 1, including 2D stage initial release.
Fixes: Certain
BeamScope fixes. |
9
Mar. '03
iDataRayOcx.exe
Version 5.00E
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Automates
installation of the DataRay .sys file during software installation.
Fixes: |
5
Mar. '03
iDataRayOcx.exe
Version 5.00D5
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adds
further features to support a to be released Visual Basic interface.
Fixes: |
25
Feb. '03
iDataRayOcx.exe
Version 5.00D3
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features: Adds
readout of fitted Gaussian diameter
Enhancements: Adds
further features to support a to be released Visual Basic interface.
Erase button now does a full erase and screen rewrite.
Color palette now stretched at lower end. Palette bar added in.
Print now prints portrait orientation with vertical stretch on profiles.
Equivalent slit profiles can now be displayed and processed in the
profiles area.
Added Export pProfile data to Excel
Added Export profile data as text.
Inclusion region selection now a single-click process.
Fixes: Choosing Inksaver no longer
negates selected zoom.
Ctrl T once again reopens the Trigger dialog. |
20
Feb. '03
iDataRayOcx.exe
Version 5.00D1
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adds
features to support a to be released Visual Basic interface.
Fixes: |
19
Feb. '03
iDataRayOcx.exe
Version 5.00C9
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements:
Fixes: Blank WinCamD image buffer. A saved image shows up
immediately on the last six files list in the File pull-down menu. |
12
Feb. '03
iDataRayOcx.exe
Version 5.00C8
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements:
Fixes: An occasional freeze on multiple WinCamD systems. |
7
Feb. '03
iDataRayOcx.exe
Version 5.00C7
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: BeamScope-P7
Search screen
now full size and only enabled during search. Helps on lower resolution
(1024 x 768) screens.
Fixes: WinCamD
intialization full fix for 'as fast as exposure time allows' switching
between up to 8 cameras on up to 4 PCI cards.
Corrects WinCamD slider overwrites on lower resolution (1024 x 768)
monitors |
3
Feb. '03
iDataRayOcx.exe
Version 5.00C
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: Adaptive
screen for BeamScope-P7 increases search profile area during search,
hides it when seearch is not active.
Fixes: WinCamD intialization partial
fix. |
26
Jan. '03
iDataRayOcx.exe
Version 5.00B5
|
Applies
to: BeamScope-P7, Beam'R
New features: Now
works under NT SP6 for BeamScope-P7 and Bewam'R
Enhancements:
Fixes: |
20
Jan. '03
iDataRayOcx.exe
Version 5.00B2
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Enhancements: After intial start,
virtually instantaneous camera startup, including when switching between
cameras.
Fixes: Tightens
profile centering on very small beams. |
19
Jan. '03
iDataRayOcx.exe
Version 5.00B
|
Applies
to: BeamScope-P7, Beam'R, WinCamD
New features:
Release
for Beam'R
Adds ability to access up to 8 WinCamD cameras on up to 4 dual-input
PCI cards..
Enhancements:
Fixes: |
7 & 15 Jan. '03
iDataRayOcx.exe
Version 5.00A3
|
Applies
to: BeamScope-P7, WinCamD
New features:
Enhancements: Adds image logging for up to 50 images at a
user determined interval.
Fixes: |
2
Jan. '03
iDataRayOcx.exe
Version 5.00A1
|
Applies
to: BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: Uses latest rev. of DataRay.sys
driver to simplify installation in Desktop and Notebook PCs. |
31
Dec. '02
iDataRayOcx.exe
Version 5.00A
|
Warning: Not for Beamscope-P7 use with Magma
CB1H & Notebook PCs. Rev. for these will be posted shortly.
Applies to: BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: Uses new DataRay.sys driver to
simplify installation. |
22
Dec. '02
iDataRayOcx.exe
Version 4.00M2
|
Warning: Do not use with Magma CB1H & Notebook
PCs. Rev. for these will be posted shortly.
Applies to: BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: Sorts recalled file PMF saving
and reading error for WinCamD. |
19
Dec. '02
iDataRayOcx.exe
Version 4.00M
|
Warning: Do not use with Magma CB1H & Notebook
PCs. Rev. for these will be posted shortly.
Applies to: BeamScope-P7,
WinCamD
New features:
Enhancements:
Fixes: Sorts recalled file reading error
for Beam'R. |
15
Dec. '02
iDataRayOcx.exe
Version 4.00L5
|
Warning: Do not use with Magma CB1H & Notebook
PCs. Rev. for these will be posted shortly.
Applies to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: Sorts PC installation issues. If
unsuccessful, contact factory. |
10
Dec. '02
iDataRayOcx.exe
Version 4.00L4
|
Warning: Do not use with Magma CB1H & Notebook
PCs. Rev. for these will be posted shortly.
Applies to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: May help some installation issues
on some PCs. If unsuccessful, contact factory. |
3
Dec. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00L2
|
Warning: Do not use with Magma CB1H & Notebook
PCs. Rev. for these will be posted shortly.
Applies to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements: Adds to Setup menu the ability to independently
set centroid clip level.
Fixes: 'Oops' introduced in 4.00L that
caused crashes with Capture block use. |
2
Dec. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00L
|
Applies
to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: Occasional crash problem on WinCamD.
|
27
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00K5b
|
Applies
to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: LabVIEW VI reinitialization error. |
19/20
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00K5
|
Applies
to: Beam'R, BeamScope-P7, WinCamD
New features: Adds LabView VI for BeamScope-P7
in LabView sub-directory.
Enhancements:
Fixes: WinCamD
locking into 'Invalid' mode; error that crept around Rev. J9 |
15
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00K3
|
Applies
to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements: Beam'R screen update rate
Fixes: |
11
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00J11
|
Applies
to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements: Simplifies installation further.
Fixes: |
10
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00J9
|
Applies
to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: Excel
2000 profile import.
Windows 2000 installation problem in Version
4.00J7 versions. |
7
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00J7
|
Applies
to: Beam'R, BeamScope-P7, WinCamD
New features:
Enhancements:
Fixes: Cold
starting on BeamMap series products.
Windows
2000 installation problem in Version 4.00H to 4.00J6 versions. |
6
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00J6
|
Applies
to: Beam'R, BeamScope-P7 only for full release. WinCamD OCX
Beta J6 release. Not yet a full release for WinCamD
New features: Beam
Profile Export to Excel & fit.
Right-click on beam profile area.
Enhancements:
Fixes: |
2
Nov. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00J
|
Applies
to: Beam'R, BeamScope-P7 only for full release. WinCamD OCX
Beta J release. Not yet a full release for WinCamD
New features: Release for Beam'R
Enhancements:
Ctrl R for simpler screen display for Beam'R
Fixes: |
29
Oct. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00H5
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
H5 release. Not yet a full release for WinCamD
New features: Drag
and click measurement of the included power as a % of total power in
a region of the profile.
Enhancements:
Beam tracking and Auto-range can now be disabled.
Fixes: |
18
Oct. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00H
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
H release. Not yet a full release for WinCamD
New features:
Enhancements:
Fixes: W2000, NT, XP: Operation with Magma
Notebook interface. Installation difficulty on a few PCs. |
18
Oct. '02
iDataRay.exe, DRexe.zip
Version 3.06K2
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: WinCamD some aspects of glitching
at large exposure times at full resolution. Saving of large pixel
count files.
Installation difficulty on a few PCs. |
11
Oct. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00G2
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
G1 release. Not yet a full release for WinCamD
New features:
Enhancements: For
full details download.
Fixes: Angular displacement now corrected.
PCI card detection improved. |
10
Oct. '02
iDataRay.exe, DRexe.zip
Version 3.06K
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: WinCamD glitching at large exposure
times.
Beam'R,
BeamMap, ColliMate, show rotation angles. |
10
Oct. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00G
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
G release. Not yet a full release for WinCamD
New features:
Enhancements: For
full details download.
Fixes: BeamScope Manual Gain, Relative
Power, Manaul Range setting.
WinCamD glitching on long exposure times. |
5
Oct. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00F7
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
F5 release. Not yet a full release for WinCamD
New features: Beam
Wander; Simple export into Paint and Excel; Lock baseline; Normalize
images.
Enhancements: For
full details download.
Fixes: Saving of large Capture Block images. |
4
Oct. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00F5
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
F5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: WinCamD Beta improvements.
Fixes: None of significance for BeamScope.
May improve install on some PCs. |
1
Oct. '02
iDataRay.exe, DRexe.zip
Version 3.06J2
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: WinCamD dll exposure control. |
27
Sept. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00F2
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: Adds BeamScope-P7 speed variation
Fixes: None of significance. May improve
install on some PCs. |
25
Sept. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00F1
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: Adds angular divergence in the Clip level menu
Fixes: None. |
23
Sept. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00E15
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: None
Fixes: Beamscope-P7 string error on software
close. |
22
Sept. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00E13
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: None
Fixes: Beamscope-P7 motor heating when
software not yet opened. |
17
Sept. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00E9
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: None
Fixes: Continuing WinCamD Beta release
improvements. |
17
Sept. '02
iDataRayOcx.exe, DRocx.zip
Version 4.00E8
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: None
Fixes: Corrects a WinCamD rare freeze
issue for beams on the edge of the imaged area. |
16
Sept. '02
iDataRay.exe, DRexe.zip
Version 3.06H6
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: Reinstates crosshair rotation. |
9
Sept. '02
iDataRay.exe, DRexe.zip
Version 3.06H5
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: Further improves DLL interfacing
to exposure control, inluding scaling correction and hysteresis. |
9
Sept. '02
iDataRayOcx.exe
Version 4.00E3
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
5 release. Not yet a full release for WinCamD
New
features: None
Enhancements: None
Fixes: Fixes a WinCamD camera detection
issue. |
3
Sept. '02
iDataRayOcx.exe
Version 4.00D5
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
3 release.
New
features: None
Enhancements: None
Fixes: Fixes a WinCamD startup camera
detection issue. |
4
Sept. '02
iDataRay.exe, DRexe.zip
Version 3.06H4
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: Improves dll interfacing to exposure
control, inluding scalling correction and hysteresis. |
3
Sept. '02
iDataRayOcx.exe
Version 4.00D5
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
release.
New
features: None
Enhancements: Now includes beam averaging.
Fixes: WinCamD now basically working as
an OCX version Capture rates improved over older versions. Comments
invited. |
3
Sept. '02
iDataRayOcx.exe
Version 4.00D2
|
Applies
to: BeamScope-P7 only for full release. WinCamD OCX Beta
release.
New
features: None
Enhancements: None
Fixes: WinCamD now basically working as
an OCX version Capture rates improved over older versions. Comments
invited. |
2
Sept. '02
iDataRayOcx.exe
Version 4.00D1
|
Applies
to: BeamScope-P7 only
New
features: None
Enhancements: None
Fixes: Some
minor issues. |
27
Aug '02
iDataRayOcx.exe
Version 4.00C8
|
Applies
to: BeamScope-P7 only
New
features: None
Enhancements: None
Fixes: Save
as Text. Some minor issues. |
14
Aug '02
iDataRay.exe, DRexe.zip
Version 3.06H3
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: Adds AccessDllExample.zip to assist with software
interfacing.
Enhancements: None
Fixes: Updates windrvr.sys to handle Service
Pack 3 for Windows 2000. |
5
Aug '02
iDataRayOcx.exe
Version 4.00C5
|
Applies
to: BeamScope-P7 only
New
features: None
Enhancements: None
Fixes: Several
minor issues. |
26
July '02
iDataRayOcx.exe
Version 4.00C2
|
Applies
to: BeamScope-P7 only
New
features: None
Enhancements: Allows Clip levels down to 0.1%
Fixes: Several
minor cosmetic issues. |
22
July '02
iDataRay.exe, DRexe.zip
Version 3.06H2
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: Corrects a memory leak bug. Corrects
an NT/2000/XP .inf file WinCamD installation issue. |
12
June '02
iDataRayOcx.exe
Version 4.00C
|
Applies
to: BeamScope-P7 only
New
features:
Enhancements: Improves M2D motor drive.
Fixes: Corrects
a beam diameter bug for inclined slits. |
3
July '02
iDataRayP7.exe
Version 3.07J
|
Applies
to: BeamScope-P7
New
features: None
Enhancements: None
Fixes: Corrects a beam diameter bug for
inclined slits |
30
June '02
iDataRay.exe, DRexe.zip
Version 3.06G2
|
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: None
Fixes: Corrects a bug that caused occasional
(rare) crashes |
30
June '02
iDataRayOcx.exe
Version 4.00B
|
Applies
to: BeamScope-P7 only
New
features:
Enhancements:
Fixes: Various
minor issues |
|
26
June '02
iDataRayOcx.exe
Version 4.00A |
Applies
to: BeamScope-P7 only
New
features: Pulsed laser
adjustment
Enhancements:
Fixes: Various
minor display issues |
|
21
June '02
iDataRay.exe, DRexe.zip
Version 3.06F2 |
Applies
to: Beam'R, BeamMap, ColliMate, WinCamD
New
features: None
Enhancements: Allows Clip level to be set as low
as 0.1%.
Fixes: BeamMap & ColliMate: Corrects
sign of Pointing[y] |